Simple. 2x4's Will Be The plywood foundation and the Outside Will Be, With 1 3 / 4''Screws holding it all together. Measure Then Screw the 2x4's Into a Box The Shape and size you want your bar, Then screw plywood is the top, front, bottom, and sides. Leave the back open. Then you-can screw around 2x4's Where You Want shelves, plywood and stick on top. Then You Can Paint the bar "any color you wish it to be. The Design is Fairly simple, I Have Used it Before and it works very well. You Can Also use nails, screws We are sturdier.Source purpose (s): DIY carpenter.
Wesley Eskaran says...
Simple. 2x4's will be the foundation and plywood will be the outside, with 1 3/4'' screws holding it all together. Measure then screw the 2x4's into a box the shape and size you want your bar, then screw plywood on the top, front,bottom, and sides. Leave the back open. Then you can screw 2x4's around where you want shelves, and stick plywood on top. You can then paint the bar any color you wish it to be. The design is fairly simple, I have used it before and it works very well. You can also use nails, but screws are sturdier.
Posted on November 10, 2011
